|
 1.
Corrosion Inhibition
Meets BSS7220 and FED-STD-791, Method
4001 (Max. 3 dots 1mm per 10
square inches
after 100 hours salt spray). Meets ASTM G-34
(Exfoliation Test).
2.
Water Displacement
Meets MIL-C-16173D. Paragraph 46.11. No evidence of
pitting, mottling,
or staining.
3.
Penetrability
Capillary height of rise 1.2" minimum in bore ø=0.015"
at room temperature.
4.
Wet ability
30 dynes/cm.
|
5.
Flow
Viscosity is 6 centistokes at 75±1°F.
6.
Adhesion at Low Temperatures
Flaking less than
1/32" at -40±5K (MIL-O-16173D).
7.
Removability
Aliphatic Naptha, Cleaning Solvent
8.
Solids
38%
9.
Flash Point
Approximately 156°F. (TCC.)
10.
Coverage
500 to 1000 sq. ft. per gallon.
|
