For a copy of a particular MSDS contact us.
  • Corrosion Inhibition Meets BSS7220 and FED-STD-791, Method 4001 (Max. 3 dots 1mm per 10 square inches after 100 hours salt spray). Meets ASTM G-34 (Exfoliation Test).
  • Water Displacement Meets MIL-C-16173D. Paragraph 46.11. No evidence of pitting, mottling, or staining.
  • Penetrability Capillary height of rise 1.2" minimum in bore ø=0.015" at room temperature.
  • Wet ability 30 dynes/cm.
  • Flow Viscosity is 6 centistokes at 75±1°F.).
  • Adhesion at Low Temperatures Flaking less than 1/32" at -40±5K (MIL-O-16173D)
  • Removability Aliphatic Naptha, Cleaning Solvent
  • Solids 38%
  • Flash Point Approximately 156°F. (TCC.)
  • Coverage 500 to 1000 sq. ft. per gallon.